Journal of Materials Science Technology

《Journal of Materials Science Technology期刊》SCI期刊 CSCD期刊 统计源期刊

Journal of Materials Science Technology

《Journal of Materials Science Technology》杂志是SCI期刊CSCD期刊、统计源期刊、,创办于1985年,发行周期是月刊。综合影响因子0.85,中国金属学会;中国材料研究学会;中国科学院金属研究所主办,中国科协主管。主要栏目有letters、review articles、original papers、research notes、brief scientifie achievement、等

  • 主管单位:中国科协

  • ISSN:1005-0302

  • 主办单位:中国金属学会;中国材料研究学会;中国科学院金属研究所

  • CN:21-1315/TG

  • 审核时间:1-3个月

  • 创刊时间:1985

  • 全年订价:¥ 537.60

  • 发行周期:月刊

咨询电话:400-838-9661

杂志简介

《Journal of Materials Science Technology》The aims of this journal are to enhance the international exchange of scientific activities. It reports principally the achievements of materials science and engineering all over the world, putting the stress on the original research papers, review articles invited by editor, letters, research notes with novelty as well as brief of scientific achievement, covering a broad spectrum of materials science and technology, encompassing: metallic materials, inorganic nonmetallic materials, composite materials.

《Journal of Materials Science Technology》登世界各国的具有创新性和较高学术水平的原始性论文,该杂志已被誉为看中国材料研究发展趋势的一个窗口。

期刊须知

1.Submission of Papers

Electronic files of MS Word and PDF are acceptable. Submission of a manuscript must be the original work of the author(s) and has not been published elsewhere or under consideration for another publication, or a substantially similar form in any orhter language.Authors are encouraged to recommend three to five individuals (including their research fields, e-mail, phone numbers and addresses) who are qualified to serve as referees for their paper.

2.Manuscript Preparation

All manuscripts should be written in English. Letters are generally no more than three journal pages. Research articles and review articles have no page limit. The supporting organization and the grant number should be given in the section "ACKNOWLEDGEMENT(S)" of the manuscript. 

3.Title

The title of the paper should be concise but informative.

4.Author name(s)

A list of all authors, as well as corresponding addresses, should be provided on the title page. Authors’ names should be given in a consistent form on all publications to facilitate indexing. It will be better if the technical titles, fax number(s), e-mail address(es), and telephone number(s) are all provided.

5.Abstract

The abstract should be no longer than 500 words. It should be informative, without descriptive words or citations, and contain the major conclusions and quantitative results or other significant items in the paper. Together with the title, the abstract must be adequate as an index to all the subjects treated in the paper, and will be used as a base for indexing.

6.Mathematics

Variables should appear in italic text. Vectors should appear in bold italic text. Capital and lower-case letters should be distinguished clearly where there could be confusion. Fractional exponents should be used to avoid root signs. Extra symbols should be introduced to avoid complicated exponents or where it is necessary to repeat a complicated expression a number of times. The slash (/) should be used wherever possible for fractions. Mathematical derivations that are easily found elsewhere in the literature should not be used.

7.Notation

Notation must be legible, clear, compact, and consistent with standard usage. All unusual symbols whose identity may not be obvious, including subscript or superscript, must be made comprehensible. Physical and mathematical variables should be in italic, vectors in boldface. Units, abbreviations and special functions should be upright. Please add notes to explain any other special symbols.

8.Figures

Figures should be original graphs (*.tif) with high contrast, suitable for immediate reproduction, typed on separate sheets and identified by its number. Width of an image should be sized to 6.5 cm for one column, 13.5 cm for full columns; and a maximum width is 15 cm for full page. In the figures, the main lines should be about 0.3 mm in width, and the assistant lines 0.15 mm. Notations in the figures should be distinct and consistent with the same ones in the text, and their font size will be 8-10 pt. Line drawings and graphs must have exported resolution of at least 1200 dpi. Photographs and micrographs must have resolution of at least 300 dpi (600 dpi if there is text or line art in the figure). Please use LZW compression. The positions of figures should be marked in the text by boxes of a suitable size. Each figure should have its own caption.

9.Tables

Tables, numbered in order of appearance, should be appended on separate sheets and identified with appropriate titles. The table title, which should be brief, goes above the table. A detailed description of its contents or table footnotes should be given directly below the body of the table.

10.References

References must be published work, and numbered consecutively in order of their first citation. References should be listed individually at the end of the text and indicated in the text with a superscript number in square brackets. All of the authors, as well as the titles of the reference articles should be given. Here are some examples of how to set the most common reference types:

Journals:

F. Huang, N.R. Tao, L. Lu, Effects of Strain Rate and Deformation Temperature on Microstructures and Hardness in Plastically Deformed Pure Aluminum, J. Mater. Sci. Technol. 27 (2011) 1–7.

Books:

W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979.

J.Q. Yu, Atlas of Binary Alloys Phase Diagram, Shanghai Scientific and Technical Publishers, Shanghai, 1983, pp. 334–339. (in Chinese)

Conference proceedings:

G.R. Mettam, L.B. Adams, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing, Inc., New York, 1994, pp. 281–304.

Patents:

C.G. Bai, L. Murr, W. Smith, A Novel Method for Preparing Al Base MMC, US Patent, No. 200101133, 2001.

Dissertations:

K.L. Corwin, A Circularly-polarized Optical Dipole Trap and Other Developments in Laser Trapping of Atoms, Ph.D. Thesis, University of Colorado, 1999.

Online references:

H.R. Sheikh, Z. Wang, L. Cormack, A.C. Bovik, Live Image Quality Assessment Database Release 2,  September 8, 2006.

11.Proofs

Authors will receive a letter informing them whether the manuscript is accepted or rejected in three months. Authors should return their revised manuscript to editorial office within one month on receipt. When an article has been amended in compliance with the comments of referee(s), an electronic file of the final version should be sent with the revised manuscript. Proofs will be sent to the authors and should be returned preferably within 48 hours to avoid publication delays.

12.Copyright

As the manuscript has been accepted, all authors should transfer the copyright of the article, including that of the printing and on-line version, to the publisher. All authors must sign the Copyright Transfer Agreement before the article can be published. This transfer will ensure the widest possible dissemination of information.

期刊荣誉

数据分析

  • 综合影响因子:2.27
  • 期刊他引率:暂无
  • 被引半衰期:暂无
  • 平均引文率:暂无
立即指数
期刊他引率
名词释义:

立即指数:表征期刊即时反应速率的指标,即该期刊在评价当年刊载的论文,每篇被引用的平均次数。

期刊他引率:期刊被他刊引用的次数占该刊总被 引次数的比例用以测度某期刊学术交流的广度、专业面的宽窄以及学科的交叉程度。

影响因子:指该刊在某年被全部源刊物引证该刊前两年发表论文的次数,与该刊前两年所发表的全部源论文数之比。

影响因子
杂志发文量
主要发文机构分析
机构名称 发文量 主要研究主题
- - -

网友评论(不代表本站观点)

晒晒图片

相关杂志

免责声明

若用户需要出版服务,请联系出版商,地址:72 Wenhua Road, Shenhe District, Shenyang 110016, China,邮编:110016。